FUN WITH LED – ARM M4 TIVA C SERIES TM4C123G – ENERGIA

1) Flasing led
void setup()
{               
  pinMode(PF_1, OUTPUT);  //sets PF1 pin as output(RED LED locate here)
  pinMode(PF_2, OUTPUT);  //sets PF2 pin as output(BLUE LED locate here)
  pinMode(PF_3, OUTPUT);  //sets PF3 pin as output(GREEN LED locate here)
}
void loop()
{
  digitalWrite(PF_1, HIGH);   // Sets PF1 in high state(RED LED on)
  delay(10);
  digitalWrite(PF_1, LOW);   // Sets PF1 in high state(RED LED off)
  delay(400);
  digitalWrite(PF_2, HIGH);   // Sets PF2 in high state(BLUE LED on)
  delay(10);
  digitalWrite(PF_2, LOW);   // Sets PF2 in high state(BLUE LED off)
  delay(400);
  digitalWrite(PF_3, HIGH);   // Sets PF2 in high state(GREEN LED on)
  delay(10);
  digitalWrite(PF_3, LOW);   // Sets PF2 in high state(GREEN LED off)
  delay(400);
  }
2) To turn on the white led……!!!
Combination 3 led will give white colour which is not  in the board
void setup()
{               
  pinMode(PF_1, OUTPUT);  //sets PF1 pin as output(RED LED locate here)
  pinMode(PF_2, OUTPUT);  //sets PF2 pin as output(BLUE LED locate here)
  pinMode(PF_3, OUTPUT);  //sets PF3 pin as output(GREEN LED locate here)
}
void loop()
{
  digitalWrite(PF_1, HIGH);   // Sets PF1 in high state(RED LED on)
  digitalWrite(PF_2, HIGH);   // Sets PF2 in high state(BLUE LED on)
  digitalWrite(PF_3, HIGH);   // Sets PF2 in high state(GREEN LED on)
}
Next  ARM based SCADA